Schulte Rock Removal

Schulte Rock Removal Equipment

Enjoy the quality design and durability that Schulte Rock Pickers offer. Don’t let rocks get in your way and save time and effort with a rock picker for your farm or commercial operation. See more information below on the full line of rock pickers, windrowers, and multi rakes!

Titan 5000 Rock Picker

Spend more time picking and less time dumping with the Schulte Titan Rock Picker.
Super wide 7′ grate with wide or narrow spacing options.
Huge 5 cu. yd. bucket (actual stone picking capacity).
Big 22.5L x 16.1 14 ply tires for flotation to handle the loaded weight.
6.5 foot tall dump height for larger piles and truck loading.
450 BHN Steel teeth and T-iron tops for extra-long life.
Greater range of grate movement (lower picking, and higher lift).
Heavy Duty Magnaloy Hytrel coupling for Direct Drive Motor.

- Specifications

Weight (Approximate)
8930 lbs. (4060 kg)
Overall length
255” (6477 mm)
Width with tires
159” (4038 mm)
Width less tires
127” (3226 mm)
Dumping height
79” (2007 mm)
Grate Width
84” (2134 mm)
Hopper capacity
5 cu. yds. (3.82 m 3)
Tire size
22.5L x 6.1 x 14ply
Required horsepower
125 HP (93 kW)
Required hydraulic pressure
12 GPM
Hydraulic motor displacement
62.7 cu. inch/rev (1027 ml)
Cushion Valve Cracking Pressure
12 GPM@2200PSI, 4 remote outlets
Recommended Reel Speed
36 rpm
Picks rocks
2” – 27” (5cm – 69cm)

RS320 Jumbo Rock Picker

RS320 Rock Picker features an extra large 3.2 cubic yard (2.43 m3) hopper for greatly increased rock removal efficiency. The RS320’s hopper has twice the capacity of an average rock picker hopper.
The RS320’s new T-iron tapered grate with 3/4” bottom and 1/2” top material virtually eliminates all small rock jamming. And the 48″ grate which is 17″ longer than most reel type rock pickers on the market picks 50% less dirt and trash than reel types because it allows more time to sift the soil out before the rock enters the bucket.
Large, flotation type, all weather 16.5L x 16.1 tires are mounted on high capacity eight bolt wheels and hubs.
The RS320 Rock Picker removes surface rock from 2 to 28 inches (50 to 700 mm) diameter.

- Specifications

Weight (Approximate)
5522 lbs. (2450 kg)
Overall length
210” (5334 mm)
Width with tires
117” (2972 mm)
Width less tires
83” (2108 mm)
Overall height
53” (1346 mm)
Hopper capacity
3.2 cu. yds. (2.4 m3)
Dumping height
45” (1140 mm)
Tire size
16.5L x 16.1
Required horsepower
75 HP (56 kW)
Standard built-in pivoting hitch

High Rise 8000 Rock Picker

Load trucks with ease!
Build larger stone piles!
Durable tapered T-iron grate with 1-1/2” (38mm) thick teeth eliminates jamming while allowing soil to sift through for clean rock picking.
Batt tubing has 3/8” thick walls with wrap around, hard surfaced batt teeth for greater strength and wear resistance.
Large, heavy wire springs hold batts firmly in position and cushion shock loads. Spring coil diameter is reduced at the ends to minimize the possibility of breaking the spring hooks.
Floating grate protects the machine from damage due to large immovable rocks.
Optional hydraulic pivoting hitch pole allows the rock picker to be quickly moved from the offset picking position to a centered transport position.
Large 16.5L X 16.1 10 ply tires provide superior flotation.

- Specifications

Weight (Approximate)
6458lbs (2929Kg)
Overall length
229” (5816mm)
Overall width with tires
115” (2921mm)
Overall width without tires
91” (2311mm)
Hopper capacity
3 cu. yards (2.29M3)
Picking width
60″ (1524mm)
Dumping height
96″ (2438mm)
Tire size
16.5L x 16.1 x 10ply(stand.)
Minimum tractor size
85 hp (63Kw)
Tractor hydraulic requirements
12 GPM @ 2200 psi, dual remote outlets
Hydraulic motor displacement
14.9 cu. inch/rev (244ml)
Final drive ratio
4:1
drive sprockets
11T and 45T #80
Crossover relief valve
1750 psi cracking pressure
Recommended reel speed
36 rpm
Pick rocks
2″ – 27″ (5cm – 69cm)

Giant 2500 Rock Picker

Take your Spraying to the Next Level with the TA1600 Top Air Premiere T-Tank Sprayer!

Automatic Height Control Option

Steerable Hitch Option

ISO Ready – Raven Option

In-Cab Agitation Control Standard

Multiple Tire/Track Options – See the chart on the right to see the difference Tracks can make!

Chemical Eductor Option
Foam Marker Option

Fence Row Nozzles Standard

Stainless Steel Boom Plumbing Standard

Booms Have Dual-spray widths (80’ – 60’; 90’ – 60’; 100’ – 60’; 120’ – 90’; 132’ – 88’)

- Specifications

Cutting Width
42ft (12.8m)
Overall Width
42.9ft (13.1m)
Overall Length
24.25ft (7.4m)
Cutting Height
2″ – 16″ (51mm – 406mm)
Transport Width
118″ (3m)
Row Crop Wheel Trans. Width
146” (3.7m)
Transport Height
165″ (13.75 ft or 4.2 m)
Weight 18,000lbs
(8165 kg) depending upon configuration
Hitch Weight
6,500lbs (2950 kg) depending upon configuration
Cutting capacity
2″ (51mm)
Minimum Tractor Size
250 hp (186 kW) ensure drawbar can support weight
Blade Tip Speed
16,300 ft/min (4970 m/min)
Blade Overlap
6.5″ (165mm)
Divider Box Rating
350 hp (261 kW)
T Box Ratings
180 hp (134 kW)
Down Box Ratings
210 hp (157 kW)
Deck Thickness
134″ (10 ga) (3.4mm)
Skirt Thickness
1/4″ (6.4mm)
Inside Wing Operating Range
11° down to 13° up
Outside Wing Operating Range
8° down to 10° up

*Divider Boxes have 1.75″ 20 Spline input and output shafts
*Down Boxes have 1.75″ 20 Spline input shafts and 2.375″ down shafts
*Tractor 80 degree CV shaft with 1 3/4” 20 spline coupler with over running clutch is standard

SRW1400 Windrower

Transports at an ultra narrow width of 93” (2.36 M).
Windrows 2” to 25” rocks with ease, forming them into neat uniform rows.
Power is supplied to the windrower drum via a heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads.
The final drive chain is totally enclosed for longer service life.
The rock windrower drum is 14 feet (4.27 M) wide and is constructed of 8 5/8 inch (219mm) heavy wall HSS tube.
Hard surfaced, 5/8 inch (15.9mm) x 6 inch thick x 6 inch (152.4mm) long teeth are welded directly to the drum pipe, resulting in problem-free operation even in difficult conditions.

- Specifications

Weight (approximate)
3500 lbs. (1588 kg)
Horsepower required
40 – 80 hp (30 – 60 kw)
Drum Width
14 ft. (4270 mm)
Maximum Ground Speed
5 mph (8 kph)
Recommended Ground Speed
2mph (3 kph)
Drum Speed
117 rpm @ 540 rpm input
Tires
9.5 L – 15, 6 ply
Transport Width
93” (2.36 M)
Transport Length
235” (5.97 M)

SRW1000 Rock Windrower

The SRW1000 rock windrower windrows 2” to 25” rocks with ease, forming them into neat uniform rows.
Power is supplied to the windrower drum via a heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads.
The final drive chain is totally enclosed for longer service life.
The windrower drum is 10 feet (3.05 M) wide and is constructed of 8 5/8 inch (219mm) heavy wall HSS tube.
Hard surfaced, 5/8 inch (15.9mm) x 6 inch thick (152.4mm) long teeth are welded directly to the drum pipe, resulting in problem-free operation even in difficult conditions
This rock windrower is a good choice for RM’s and Counties for gravel reclamation

- Specifications

Weight (approximate)
2660 lbs. (1206 kg)
Horsepower required
40 – 150 hp (30 – 112 kw)
Drum Width
10 ft. (3050 mm)
Maximum Ground Speed
5 mph (8 kph)
Recommended Ground Speed
2mph (3 kph)
Drum Speed
117 rpm @ 540 rpm input
Tires
9.5 L – 15, 6 ply
Transport Width
134″ (3.4 M)
Transport Length
179″ (4.55 M)

SRW800 Rock Windrower

Windrows 2” to 25” rocks with ease, forming them into neat uniform rows
Power is supplied to the rock windrower drum, via heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads
The final drive chain is totally enclosed for longer service life
The rock windrower drum is constructed of 8 5/8” (219mm) heavy wall tube
Hard surfaced 5/8” thick (15.9mm) x 6” (152.4mm) long teeth are welded directly to the drum, resulting in problem-free operation
Narrow, 8.5’ transport width

- Specifications

Weight (approximate)
1350 lbs. (613 kg)
Horsepower required
35 hp to 100 hp (30 – 60 kw)
Drum Width
88 5/8” (2215 mm)
Maximum Ground Speed
5 mph (8kph)
Recommended Ground Speed
2 mph (3 kph)
Drum Speed
102 rpm @ 540 input
Tires
16.5/6.5 x 8
Transport Width
8.5’ (2591 mm)
Transport Length
67” (1702 mm)

SMR-800 Multi Rake

The rototilling action of the SMR-800 breaks lumps, roots and other debris while reclaiming rocks by forming them in uniform rows.
The 4″ teeth give you greater ground penetration and are made of wear resistant Hardox 450.
The SMR-800 is chain driven to keep the hydraulic motor out of harm’s way.
Option for standard solid mount or floating mount that can pivot up to 20 degrees left or right, manually or hydraulically.
Solid mounted or hydraulic lifting 23″ forklift grade tires for increased maneuvering and rugged durability.
High or low flow hydraulic options.
Sweeper options shown on the left